PVC Components Manufacturer in India
PVC is a flexible material that offers good resistance to weather, dust, and corrosion. It also provides electrical insulation and can be produced economically in different shapes and quantities. It is a practical alternative to rubber when high flexibility is not required, and to metal where low weight and corrosion resistance are important. Easkay India is a PVC moulded parts manufacturer in India producing handrail, protective covers, caps and specific designed components for industrial applications.
- Extruded & Moulded
- Custom Colours
- Custom-Made Parts
PVC Components & Parts
Handrail
Custom Moulded Components
DIP PVC Components
DIP moulded PVC components include soft grips, covers and a variety of shapes, with low tooling cost.
PVC End Cap
Flexible end cap for tubes and profiles, required sizes and colour matching.
PVC Dust Cap
Protective dust cap for connectors and open ends and multiple soft DIP options for secure fit.
PVC Cap
General-purpose cap for tubes and fittings, hard and soft options in standard sizes.
PVC Insulation Sheet
Electrically insulating mats for panels and workstations, custom thickness and sizes.
PVC Terminal Cap
PVC Terminal Caps protect electrical terminals and cable ends from dust, moisture, and accidental contact.
When PVC Is the Right Choice
Material is selected when the application needs good weather resistance, electrical insulation, consistent long extrusions, and economical production in larger quantities. It is widely used for handrail, protective cap, and trims where corrosion resistance, clean appearance, and low weight are important. Hard grades hold their shape well, while soft grades provide grip and protection.
PVC Grades We Manufacture
PVC products manufacturing process
Three processes cover the range on this page, chosen by part shape and production volume rather than by preference. The continuous profile is extruded to length, soft covers and grips are cast on without a mould, and caps and fittings are formed rigidly in a tool. Full specifications for each product are available on its individual product page.
| Process | Why This Process | Typical Quantity |
|---|---|---|
| Extrusion | Continuous, consistent cross-section at length, the only practical way to produce profile like handrail economically. | Production & High Volume |
| DIP Moulding | No tooling cost, so it suits prototypes and low volumes, and holds tighter tolerances, especially in flexible grades. | Prototype & Low Volume |
| Injection / Compression Moulding | Fastest turnaround once tooling exists, the right call for a variety of plugs, end pieces or one-off shapes. | Any Quantity |
Material Selection & Guide
Different grades can be selected according to the required hardness, flexibility, dimensional stability and operating conditions. The material offers a practical balance of strength and flexibility across applications, from handrail profiles and protective covers to end caps, fittings and moulded products. Grade selection should be associated with the functional and performance requirements of each application.
Customisation Options
Industrial Applications
Architecture & Staircase Fabrication
Handrail profile grips and finishes tube handrail on staircases and balustrades
End caps seal and finish exposed tube and profile ends
Electrical & Cable Assembly
Cast components insulate and colour-code cable lugs, terminals and connectors
Dust plugs protect open connectors and ports during storage and transit
Automotive
Moulded Material grommets, bushes and edge trim inside assemblies
Caps finish and protect exposed tube and bracket ends
General Industrial
Caps & fittings protect fixtures, fasteners and tube ends during use and storage
Moulded blanks custom shapes produced from drawing or sample