Plastic Components Manufacturer in India
To ensure long-term performance, equipment reliability, and minimal maintenance, Easkay India develops engineering plastic components as per the specific operational applications. The choice of manufacturing procedure and polymer grade is directly guided by our in-house experts.
Our team follows strict criteria, including mechanical load, operating temperature, chemical exposure, sliding friction, moisture, dimensional tolerance, electrical insulation, and required service life.
As a plastic-moulded component manufacturer in India, we specialise in producing custom-fabricated items, washers, bushes, caps, plugs, pins, port caps, S-hooks, panel fastener clips, sheets, and conveyor idler roller labyrinth seals. These are manufactured from materials such as HDPE, Nylon, Delrin, PTFE (Teflon), LDPE, and Polypropylene (PP). Depending on the specific buyer requirements, production units, and material properties, manufacturing is executed via vertical & injection moulding or CNC machining based directly on customer drawings, approved samples, or CAD models. All the processes are in-house, according to the industrial standard.
- Moulded & CNC Machined
- Design-Based Manufacturing
Industrial Plastic Components & Parts
Plastic Bush
Low-friction bushes for shafts and pivots, wear-resistant, custom bore sizes.
Used in: General Machinery, Automotive
Plastic Washer
These washers are used for spacing and insulation, and can be made in custom thickness, diameter & grades.
Used in: General Machinery, Electronics
Plastic Cap
Protective caps for tubes and fittings, rigid grades in standard and custom sizes.
Used in: Machinery & Equipment
Plastic Conveyor Idler Roller Labyrinth Seal Set
Labyrinth seals for conveyor idler rollers, keep dust and moisture out of bearings.
Used in: Handling & Conveyor Systems
Plastic Dust Caps
Protective dust caps for connectors and open ends, available in various sizes for a secure fit.
Used in: Electronics, General Industrial
Plastic Pin
These pins can be used for masking and fastening, and can be designed according to the drawing or sample.
Used in: General Machinery
Plastic Plug
These plugs can be used for sealing holes and ports and can be manufactured in variety of sizes and colours.
Used in: Machinery & Equipment
Plastic port cap
Sealing caps for hydraulic and pneumatic ports, protect threads and openings in transit.
Used in: General & Heavy Machinery
Plastic Sheet
Sheets cut to size for fabrication and lining, supplied in multiple grades and thicknesses.
Used in: General Industrial, Fabrication
-Products.jpg "Teflon (PTFE) Products")
Teflon (PTFE) Products
Low-friction, chemical-resistant PTFE components, sheets, bushes and machined products.
Used in: General & Heavy Machinery
PLASTIC S-HOOK
S-hooks are used for hanging and light-duty fastening and it can also be used for corrosion-free alternatives to metal.
Used in: Handling & Conveyor Systems
Plastic Panel Fastener Clips
These snap-fit clips are used for panel and trim fastening; it provides tool-free and reusable fixing.
Used in: Automotive
Manufacturing Capabilities
As a manufacturer of injection moulded plastic parts, components are produced using these methods, chosen by part geometry, grade and production volume. Our injection moulding for high-volume production of small pieces, CNC machining for tight-tolerance or low-volume work, and sheet cutting for flat or fabricated parts. All three run under our uniform quality system, with material selected against the part's actual working conditions, load, friction, chemical exposure or temperature. Full specifications, tolerances and drawings for each product are available on its individual product page.
| Process | Why This Process | Examples |
|---|---|---|
| Injection Moulding | Low cost per part higher volumes. Once tooling is paid for, the mould helps maintain consistent quality from batch to batch. | Plugs (dust & port variants) and pins |
| CNC Machining | No tooling cost, so it suits prototypes and low volumes, holds tighter tolerances, especially in Acetal and PTFE | Bushes, conveyor idler roller labyrinth seals, and other industrial parts |
| Sheet Cutting & Fabrication | Fastest turnaround with no tooling at all, the right call for flat stock, custom blanks, or one-off replacements | Cut-to-size sheets, custom blanks |
| Vertical Moulding | Granules are heated until they melt, then injected vertically from the top into a mould under high pressure. | Washers, bushes |
- Our processes under one roof - moulding, CNC machining and sheet cutting under a single quality system
- Prototype to bulk - single-cavity samples through high-volume production runs
- Batch traceability- test reports available for automotive and export orders
Engineering Plastic Materials for Industrial Components
Industries We Serve
Automotive & Two-Wheeler Assemblies
Panel fastener clips, plugs, caps and pins moulded in Nylon, PP and HDPE for trim, panels and wiring routes, built to hold tolerance under vibration and heat cycling in automotive and two-wheeler assemblies.
Industrial & Heavy Machinery
Nylon and Delrin bushes, washers and pins that run quietly with low friction and no lubrication, keeping continuous-duty machinery moving with less wear and less maintenance.
Conveyor & Material Handling
Conveyor idler roller labyrinth seals that keep dust and water out of roller bearings, plus S-hooks and plugs for racking, storage and bulk handling systems.
Electrical, Electronics & Enclosures
Port caps, dust caps and insulating PTFE and HDPE sheets that protect connectors, ports and panels from moisture and dust, with electrical insulation where it matters.