+91-96174 44417
sales@easkayindia.com
Download Brochure →
Get a Quote
Custom PU Moulded
POLYURETHANE PRODUCTS · CUSTOM MOULDED COMPONENTS

Custom PU Moulded Components Manufacturer in India

Easkay India manufactures custom moulded polyurethane components for non-standard shapes and application-specific requirements, supplying PU moulded parts in India for industrial applications. Parts are developed from engineering drawings, physical samples or defined specifications, with features incorporated into the required shape.

  • 60–95
    Shore A Hardness Range
  • Drawing / Sample / Spec
    COMPONENT DEVELOPMENT ROUTE

Custom PU Moulded Component Specifications & Grades

HardnessShore A 60–95
ShapeCustomer-specific
ProductionPU Moulding
InsertsMetal inserts / plates
ColourRed, Yellow, Orange, Green and other colours as specified
Need a hardness or colour not listed? Contact Us →

Custom PU Moulded Component Manufacturing Process

Custom PU Moulded

TOOLING & MOULDING

  • Drawing / sample review for drawing-based manufacturing.
  • Tooling development.
  • Polyurethane moulding.
  • Insert integration where required.
  • Secondary machining where specified.
  • Finished-component inspection.

Custom PU Moulded Components for Industrial Applications

IN SERVICE

The component specification can include dimensions, hardness, tolerances, inserts and functional features.
  • Industrial equipment.
  • Material handling systems.
  • Automotive parts.
  • Conveyor equipment.
  • Jigs and fixtures.
  • Special-purpose machinery.
Custom PU Moulded

Custom PU Moulded Components Development Capability

  • New mould development.
  • Sample-to-component development.
  • Custom profiles.
  • Integrated metal inserts.
  • Specified hardness and colour.
  • Prototype and production quantities.
Start a Custom Component Contact Us →

Related Products

PU Blocks

PU Blocks

Our block range is used as spacers, mounting supports and wear pads in industrial equipment. Available in different sizes and configurations to suit application requirements.

View Details
PU Bush

PU Bush

Supports axial loads and shaft alignment. A bonded metal-bore option is available for higher-load applications.

View Details
PU Flanged Bush

PU Flanged Bush

Sleeve-style bushes with an integral metal-bonded bore, used in suspension and shock-mount assemblies for reduced abrasion and vibration control.

View Details
PU Pad

PU Pad

Cut and moulded to protect chutes, guides and contact surfaces from abrasion in material handling equipment.

View Details

Frequently Asked Questions

Custom PU moulded parts are application-specific polyurethane parts produced to a shape that standard products do not cover. Custom PU parts for industrial equipment are used where the assembly needs a defined shape, hardness and feature set that no catalogue part matches. PU moulded components for conveyor equipment are produced for contact, guide and support positions across material handling and conveyor systems, along with jigs, fixtures and special-purpose machinery.

Yes. Component manufacturing starts with a review of your engineering drawing, physical sample or written specification. Tooling is then developed to that shape before moulding begins. Sample based PU component development follows the same route where no drawing exists and the component has to be reproduced from an existing part.

Yes. Polyurethane moulding with metal inserts bonds plates, sleeves or fasteners directly into the component during the moulding stage. This removes the need for a separate bonding operation later and gives a stronger interface than post-assembly fixing. Inserts are positioned as per the drawing and held in place through the moulding cycle.

Yes. Prototype PU components are supplied for design validation before committing to full production tooling and volumes. Trial quantities allow the component to be fitted and tested in the actual assembly. Once the specification is approved, it is retained on record for repeat manufacturing against the same drawing.

Holes, recesses, grooves, slots and profiled sections can all be built into the required shape. PU components with custom profiles are produced where the drawing calls for shaped contact faces, stepped sections or retention features. Where a feature needs tighter dimensional control than moulding alone allows, secondary machining is carried out after moulding.

Need a Custom PU Moulded Components?

Get a Quote