PU Roller Manufacturer & Supplier in India
Easkay India is a polyurethane rollers manufacturer in India, manufacturing rollers for conveying, guiding, handling and industrial applications. These can be produced with specified outer diameter, face width, hardness, bore and profile, and with metal cores..
- 60–95Shore A Hardness Range
- Drawing / Sample / SpecCOMPONENT DEVELOPMENT ROUTE
Polyurethane Roller Specifications & Grades
| Hardness | Shore A 60–95 |
| Roller OD | As specified |
| Face Width | As required |
| Bore | Drawing based |
| Core | Metal core where required |
| Colour | Red, yellow, green and other colours as specified |
| Profile | Plain / profiled |
| Production | Moulded / cast / machined |
Need a hardness or colour not listed? Contact Us →
Polyurethane Roller Manufacturing Process
TOOLING & MOULDING
- PU casting / moulding.
- Cores preparation and PU bonding where applicable.
- Turning and profile machining.
- Bore finishing.
- Face machining.
Polyurethane Roller Industrial Applications
Hardness and surface shape of these parts are selected according to the required contact, load, speed and wear conditions.
- Conveyor systems — PU conveyor rollers for material movement and guiding applications.
- Material handling — contact and transport rollers.
- Processing equipment — repeated-contact rollers.
- Industrial machinery — application-specific assemblies.
Polyurethane Rollers Development Capability
Related Products
Custom PU Moulded
Custom-moulded PU parts produced to draw or sample for equipment-specific fits, brackets, and other modules, to meet exact dimensional and functional demands for equipment, machinery and industrial assemblies.
PU Blocks
Our block range is used as spacers, mounting supports and wear pads in industrial equipment. Available in different sizes and configurations to suit application requirements.
PU Bush
Supports axial loads and shaft alignment. A bonded metal-bore option is available for higher-load applications.
PU Flanged Bush
Sleeve-style bushes with an integral metal-bonded bore, used in suspension and shock-mount assemblies for reduced abrasion and vibration control.
Frequently asked questions
PU rollers are polyurethane-covered rollers used for conveying, guiding and repeated-contact applications. PU conveyor rollers move and guide material along belt and roller conveyor systems. PU rollers for material handling are fitted at transport and contact positions where the roller face must grip without marking the product, and PU rollers for processing equipment handle repeated contact over long production runs.
Yes. Metal core PU rollers are produced by bonding polyurethane directly onto a prepared steel or aluminium core. The core is cleaned and treated before casting so the bond holds under continuous rotational load. Bore and face dimensions are machined after casting to hold the required running tolerance.
Yes. PU roller recoating and rebuilding strips the worn polyurethane from an existing core and re-casts a new cover onto it. This is usually more economical than replacing the complete assembly, particularly where the core is machined to a specific bore or has integrated bearings. Send the core along with the required grades and finished OD.
The hardness and surface options of these parts are selected on contact, load, speed and wear conditions at the application. These are supplied from Shore A 60 to 95. Softer covers give better grip and product protection, harder covers give better wear life under load.
Outer diameter, face width, bore and hardness are the minimum requirements. Custom OD and custom width PU rollers are produced rather than fixed sizes. If the roller is a replacement, sending the existing part or a drawing of the core allows the specification to be matched directly.